Sort by:
128 products
128 products
Accessories Information
The Rockstar Series from Shapton improve on the GlassHR Series by removing the glass backing, and adding extra stone thickness for a longer lifespan. They are a hard stone that offers lighter feedback levels than other stones, but cut very fast, require no soaking, and are very slow to dish.
This 1000 & 3000 Combination Set is perfect for daily maintenance of stainless steel and carbon, for users that wish to retain some toothiness.
Accessories Information
This 500/1000/4000/6000 kit is the perfect bundle to move more stubborn steels like SG2 or HAP40, or for minor chip repairs, as well as for taking carbon and stainless edges to a more refined 6000 finish. A synthetic marvel made by Morihei Japan, the Hishiboshi whetstones feel like natural stones, require no soaking, are extremely long lasting and offer excellent tactile feedback.
- Size: 210 x 75 x 26mm
- 840g
An excellent all round stone balancing cutting speed and wear rate delivering excellent value for money. Not as hard as Shapton Glass, comparable to the Kuromaku series. Splash and go, no need for soaking, ideal for beginners or intermediate sharpeners.
Dimensions of stone - 210 x 70 x 10mm
Made In Japan
When you're trying to achieve an ultra-precise edge, the slightest wobble or vibration can result in distortions in the blade. The GS Holder is heavy enough to use as a sharpening base, and its form gives it stability far higher than that of the GS Field Holder.
- Dimensions: 259 x 86 x 56mm
- Weight: approx. 1,960g
Food-safe Camellia Oil is the most natural way to ensure carbon steel knives do not rust during storage. Camellia is a very light oil, and when applied creates a barrier between your knife and moisture which may rust or damage your blade. It does not affect glue or finishes on your knives.
Accessories Information
This synthetic/natural powder (Mikawa Nagura) blend is a perfect finisher for most carbon steels. Designed to be used after the 3000 grit Ikyu Shin Nagura.
These are soaking stones on the softer side which are best used with a slurry, so use a lapping plate or Nagura stone.
Accessories Information
This synthetic/natural powder (Mikawa Nagura) blend is a perfect finisher for most stainless steels (AUS8/10, VG10, Ginsan etc) and provides a very toothy yet refined everyday edge for carbon knives. Designed to be used after the 1000 grit Ikyu Shin Nagura.
These are soaking stones on the softer side which are best used with a slurry, so use a lapping plate or Nagura stone.
An excellent all round stone balancing cutting speed and wear rate delivering excellent value for money. Not as hard as Shapton Glass, comparable to the Kuromaku series. Splash and go, no need for soaking, ideal for beginners or intermediate sharpeners.
Dimensions of stone - 210 x 70 x 10mm
Made In Japan
An excellent all round stone balancing cutting speed and wear rate delivering excellent value for money. Not as hard as Shapton Glass, comparable to the Kuromaku series. Splash and go, no need for soaking, ideal for beginners or intermediate sharpeners.
Dimensions of stone - 210 x 70 x 10mm
Made In Japan
The Chocera are one of Naniwa's premium whetstone offerings. Similar to the Shapton Glass but with better feedback, albeit a slightly faster wear rate. A thick, firm, high-end stone perfect for all steel stypes and applications.
Dimensions of stone - 210 x 70 x 20
Made In Japan
Accessories Information
A synthetic marvel made by Morihei Japan, the Hishiboshi whetstones feel like natural stones, require no soaking, are extremely long lasting and offer excellent tactile feedback.
Accessories Information
A synthetic marvel made by Morihei Japan, the Hishiboshi whetstones feel like natural stones, require no soaking, are extremely long lasting and offer excellent tactile feedback.
If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time.
Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value.
Grit: #120 -> #320 -> #1000 -> #5000 -> #8000
The Chocera are one of Naniwa's premium whetstone offerings. Similar to the Shapton Glass but with better feedback, albeit a slightly faster wear rate. A thick, firm, high-end stone perfect for all steel stypes and applications.
Dimensions of stone - 210 x 70 x 20
Made In Japan
Accessories Information
The Rockstar Series from Shapton improve on the GlassHR Series by removing the glass backing, and adding extra stone thickness for a longer lifespan. They are a hard stone that offers lighter feedback levels than other stones, but cut very fast, require no soaking, and are very slow to dish.
- Overall size: 210 x 70 x 10mm
- Micron: 1
-
Mesh: 8000
Accessories Information
The GlassStone series of sharpening stones uses a revolutionary design to provide great usability within a thin package formed from a combination of glass layers. The conventional image is that sharpening stones are large and heavy, but GlassStones are not only thin and light, but also strong, as layers of tempered glass are stuck together. GlassStones therefore have strong resistance to cracking or sudden breakage caused by external shocks such as being dropped.
Shapton stones do not need to be soaked except the very first time after purchase. We do recommend that on first use, you pre-soak the stone in water for five to six minutes to secure even smoother sharpening. Shapton stones do not need a Nagura Stone, and lapping with a Nagura Stone will leave the surface rough and ragged.
The GS Field Holder is designed to store three Shapton GlassStones neatly. When turned over, it can also be used as a sharpening base.
-
Dimensions: 253 x 80 x 53mm
- Weight: approx. 640g
About the Natsuya
The Binsui is a natural whetstone used at the start of a natural stone progression. They are of slighter higher hardness and are fast cutting.
All natural stone sales are final, we try to provide the best possible representation of the stone via our images.
*Available to Australian customers only - International customers please contact us to purchase*
About the Natsuya
The Binsui is a natural whetstone that is used after lower grit stones, they form the base of a natural stone polish and are of a higher hardness.
All natural stone sales are final, we try to provide the best possible representation of the stone via our images.
*Available to Australian customers only - International customers please contact us to purchase*
The Chocera are one of Naniwa's premium whetstone offerings. Similar to the Shapton Glass but with better feedback, albeit a slightly faster wear rate. A thick, firm, high-end stone perfect for all steel stypes and applications.
Dimensions of stone - 210 x 70 x 20
Made In Japan