Sort by:
72 of 293 products
72 of 293 products
Accessories Information
A synthetic marvel made by Morihei Japan, the Hishiboshi whetstones feel like natural stones, require no soaking, are extremely long lasting and offer excellent tactile feedback.
Accessories Information
Includes
- Yoshoku 1000/3000 Grit Deluxe Combination Stone (soak for 5-10minutes before use)
- Approx. stone dimensions: 180mm x 60mm x 30mm
- Guide Clip (Consider applying masking tape to the knife to reduce potential risk of scratching)
- Nagura Stone (flattening stone)
- Bamboo holder with rubber nonslip base
- Suitable for VG10, AUS8 & softer stainless applications
- Best paired with a lapping stone/plate for flatting between use
- Entry level stone
Accessories Information
Suehiro are Japanese-made whetstones and some of the most popular in the market due to their consistent quality and excellent performance. We find the stones to have excellent feedback and even wear.
– Combination 1000/3000 grit for dull knives or moderate/small chip repair followed by finishing
– Includes sturdy plastic base with rubber feet
– Includes small Nagura stone
- 175mm x 60mm x ~11-14mm (per grit)
– 950g weight
Accessories Information
Suehiro is Japanese-made and some of the most popular in the market due to their consistent quality and excellent performance. We find the stones to have excellent feedback and even wear.
– Combination 1000/6000 grit for dull knives or moderate/small chip repair followed by polishing
– Includes a sturdy plastic base with rubber feet
– Includes small Nagura stone
- 175mm x 60mm x ~11-14mm (per grit)
– 950g weight
Accessories Information
A synthetic marvel made by Morihei Japan, the Hishiboshi whetstones feel like natural stones, require no soaking, are extremely long lasting and offer excellent tactile feedback.
Accessories Information
- Guide Clip
- Clip to the spine of your knife to maintain a consistent sharpening angle
- Consider applying masking tape to the knife to reduce potential risk of scratching.
Accessories Information
Heavy duty, sturdy rubber-based whetstone holder.
– Sturdy stainless steel and rubber construction
– Heavy Duty Locking Screw
– Holds stones from 73mm to 218mm in length
– Weight: 577g
These Naniwa are excellent bang for buck, albeit being a little smaller than traditional stones. Great for touching up of Petty/Bunka/Nakiri size blades and smaller Gyuto.
- Medium-Soft
- Whetstone grit ＃1000
- Whetstone Size 175×55×15mm
Accessories Information
The Rockstar Series from Shapton improve on the GlassHR Series by removing the glass backing, and adding extra stone thickness for a longer lifespan. They are a hard stone that offers lighter feedback levels than other stones, but cut very fast, require no soaking, and are very slow to dish.
- Overall size: 210 x 70 x 10mm
- Micron: 2
-
Mesh: 6000
- No Case Included
The Chocera are one of Naniwa's premium whetstone offerings. Similar to the Shapton Glass but with better feedback, albeit a slightly faster wear rate. A thick, firm, high-end stone perfect for all steel stypes and applications.
Dimensions of stone - 210 x 70 x 20
Made In Japan
The Chocera are one of Naniwa's premium whetstone offerings. Similar to the Shapton Glass but with better feedback, albeit a slightly faster wear rate. A thick, firm, high-end stone perfect for all steel stypes and applications.
Dimensions of stone - 210 x 70 x 20
Made In Japan
The Chocera are one of Naniwa's premium whetstone offerings. Similar to the Shapton Glass but with better feedback, albeit a slightly faster wear rate. A thick, firm, high-end stone perfect for all steel stypes and applications.
Dimensions of stone - 210 x 70 x 20
Made In Japan
An excellent all round stone balancing cutting speed and wear rate delivering excellent value for money. Not as hard as Shapton Glass, comparable to the Kuromaku series. Splash and go, no need for soaking, ideal for beginners or intermediate sharpeners.
Dimensions of stone - 210 x 70 x 10mm
Made In Japan
An excellent all round stone balancing cutting speed and wear rate delivering excellent value for money. Not as hard as Shapton Glass, comparable to the Kuromaku series. Splash and go, no need for soaking, ideal for beginners or intermediate sharpeners.
Dimensions of stone - 210 x 70 x 10mm
Made In Japan
An excellent all round stone balancing cutting speed and wear rate delivering excellent value for money. Not as hard as Shapton Glass, comparable to the Kuromaku series. Splash and go, no need for soaking, ideal for beginners or intermediate sharpeners.
Dimensions of stone - 210 x 70 x 10mm
Made In Japan
An excellent all round stone balancing cutting speed and wear rate delivering excellent value for money. Not as hard as Shapton Glass, comparable to the Kuromaku series. Splash and go, no need for soaking, ideal for beginners or intermediate sharpeners.
Dimensions of stone - 210 x 70 x 10mm
Made In Japan
An excellent all round stone balancing cutting speed and wear rate delivering excellent value for money. Not as hard as Shapton Glass, comparable to the Kuromaku series. Splash and go, no need for soaking, ideal for beginners or intermediate sharpeners.
Dimensions of stone - 210 x 70 x 10mm
Made In Japan
An excellent all round stone balancing cutting speed and wear rate delivering excellent value for money. Not as hard as Shapton Glass, comparable to the Kuromaku series. Splash and go, no need for soaking, ideal for beginners or intermediate sharpeners.
Dimensions of stone - 210 x 70 x 10mm
Made In Japan
An excellent all round stone balancing cutting speed and wear rate delivering excellent value for money. Not as hard as Shapton Glass, comparable to the Kuromaku series. Splash and go, no need for soaking, ideal for beginners or intermediate sharpeners.
Dimensions of stone - 210 x 70 x 10mm
Made In Japan
The Chef's Edge range of stones was designed around a blend of performance, price, and longevity. The 1000 grit are an extra thickness, fast-cutting stone with excellent feedback and a slow wear rate. A little softer than the Kuromaku from Shapton.
205mm x 76mm x 26mm
770g
The Chef's Edge range of stones was designed around a blend of performance, price, and longevity. The 1000 grit are an extra thickness, fast-cutting stone with excellent feedback and a slow wear rate. A little softer than the Kuromaku from Shapton.
210mm x 75mm x 29mm
982g
The Chocera are one of Naniwa's premium whetstone offerings. Similar to the Shapton Glass but with better feedback, albeit a slightly faster wear rate. A thick, firm, high-end stone perfect for all steel stypes and applications.
Dimensions of stone - 210 x 70 x 20
Made In Japan
An excellent all round stone balancing cutting speed and wear rate delivering excellent value for money. Not as hard as Shapton Glass, comparable to the Kuromaku series. Splash and go, no need for soaking, ideal for beginners or intermediate sharpeners.
Dimensions of stone - 210 x 70 x 10mm
Made In Japan
Accessories Information
The GlassStone series of sharpening stones uses a revolutionary design to provide great usability within a thin package formed from a combination of glass layers. The conventional image is that sharpening stones are large and heavy, but GlassStones are not only thin and light, but also strong, as layers of tempered glass are stuck together. GlassStones therefore have strong resistance to cracking or sudden breakage caused by external shocks such as being dropped.
Shapton stones do not need to be soaked except the very first time after purchase. We do recommend that on first use, you pre-soak the stone in water for five to six minutes to secure even smoother sharpening. Shapton stones do not need a Nagura Stone, and lapping with a Nagura Stone will leave the surface rough and ragged.
- Overall size: 210 x 70 x 10mm
- Abrasive layer: 5mm
- Mesh: 10000
- 360g
Chef's Edge
We pride ourselves on offering an unparalleled selection of Japanese knives. From the versatile Gyuto and the precise Santoku to specialized knives like the Nakiri and Yanagiba, each knife is handpicked for its quality and performance.